Post-Construction Cleanup in Delaware
Construction-Ready Cleanup for Delaware Commercial Properties
A new commercial building isn’t truly finished until the construction mess is off the exterior. Delaware’s humid, coastal, high-pollen climate means a freshly finished building starts collecting organic growth and surface film almost immediately, and on top of that a new build arrives coated in the residue of the work itself: construction dust, concrete splatter, and paint overspray clinging to every surface.
We clean up commercial properties after the build or renovation is done, working across building exteriors, concrete flatwork, pavers, decks and porches, and windows to pull off everything the build left behind. It’s work we do for the general contractors, builders, and property managers coordinating that final clean before a commercial space opens or gets turned over. Ortiz Pro Wash handles the whole exterior so the last step is one you don’t have to manage piece by piece.
Call us at (302) 228-6599 to walk through your project and get on the schedule.
What Sets Our Post-Construction Cleanup Apart
A final clean is the last thing standing between a finished build and handover, and here’s why crews bring us in for it.
We Handle What Standard Cleaning Can't
Construction leaves residue that standard cleaning can’t touch: concrete splatter, paint overspray, and drywall dust bond to surfaces during the build. We use targeted pressure washing and specialty construction-residue cleaners matched to each surface to lift it cleanly, so a finished job isn’t just film smeared thinner but actually gone.
Every Exterior Surface, One Crew
One crew cleans the whole finished build: siding, concrete flatwork (walkways, aprons, and loading areas), pavers, decks and porches, and windows. That means you coordinate one vendor for the entire exterior turnover instead of stitching together a separate building washing crew, a window company, and a flatwork outfit and hoping their schedules line up.
Pre-Existing Damage Documented Before We Start
We inspect every surface before starting and tell you what we find, especially on windows, where any construction damage like scratches, chips, or cracks gets documented separately from what we’re there to clean. On a fresh build, the last trade on site often gets blamed for damage that was already there. Our up-front documentation keeps that off the contractor and the property manager.
Post-Construction Window Specialists
We treat post-construction windows as their own job rather than a rushed afterthought, so a contractor knows the glass is being handled properly and given the time it needs.
How Our Post-Construction Cleanup Works
The On-Site Walkthrough and Free Written Estimate
A contractor, builder, or property manager reaches out by phone or email, and we schedule a site visit to assess the scope: which surfaces are involved, how much construction residue is present, whether windows are included, and what condition the build is in. We document any pre-existing damage during that walkthrough, then follow up with a formal written proposal by email. The estimate is free.
Scheduling Around the Build Timeline
Post-construction cleanup is driven by the construction timeline, so we schedule the clean for after the trades are done. We coordinate with the general contractor or property manager so we aren’t cleaning surfaces that are about to get dirty again, and we confirm the start date and expected completion a few days ahead and commit to being on time.
Exterior Surface Cleanup
We work surface by surface across the finished build. Building siding gets a soft wash or power wash matched to the material, concrete flatwork gets our surface cleaner run in even sections, and pavers, decks, and porches each get their turn. Every surface is pre-treated first so the specialty construction-residue cleaners can break the bond before we wash. Our equipment for this stage includes a power washer, a hot water unit, a soft wash system, and the surface cleaner attachment.
Window and Glass Cleanup
Windows and glass doors are cleaned by hand with the traditional squeegee method, buffing as needed. Post-construction glass takes more time and treatment than a standard clean, so we give it its own step rather than rushing it at the end. Our tools here are the squeegee, window cleaning solution, and buffing cloths, and the section below covers how we handle it in full.
Final Walkthrough and Invoice
We walk the finished property with the contractor or property manager if they’re available and confirm the work meets expectations. Invoicing follows once you’re satisfied, running net 30 or net 60 depending on how your company operates. If something isn’t right, we’d rather hear it at the walkthrough and make it right.
Post-Construction Window Cleaning
Post-construction window cleaning is a specialty, not a standard window cleaning job. Construction leaves heavier debris, residue, and sometimes paint on the glass, so it takes extra time and treatment to bring it clear. We clean it by hand with the traditional squeegee, detailing and buffing every pane rather than taking shortcuts. New glass also arrives scratched or chipped more often than people expect, so before we start we flag cracked or broken windows; we won’t clean them so you’re never left holding the bill for damage we didn’t cause, and anything already marked gets documented separately from what we’re there to clean. The window portion is priced per window, confirmed at your estimate.
Our Post-Construction Cleanup Guarantee
Every post-construction cleanup job is backed by our satisfaction guarantee, and reaching us is easy: no runaround, just call. If you reach out to us and you’re not happy with the service, we try to either make you happy by going back again and making it right, and if not, we give you some sort of money-back guarantee. The first move is always the same, which is to come back and re-do the work until it meets your standard.
Frequently Asked Questions
Can you clean windows that were scratched or chipped during construction?
We inspect every window before we touch it and document any pre-existing damage, whether scratches, chips, or cracks, separately from what we’re there to clean. We flag cracked or broken windows before we start; we won’t clean them so you’re never left holding the bill for damage we didn’t cause. On a fresh build, damaged glass isn’t unusual, and documenting it up front protects the contractor and property manager from being blamed for it later.
How is post-construction cleanup different from a regular pressure wash?
A regular pressure wash rinses off dirt and organic growth, but it won’t lift construction fallout, since concrete splatter, paint overspray, and drywall dust bond to surfaces as the build goes up. That calls for construction-residue cleaners chosen for each surface and pressure washing aimed at the specific mess. In one visit we cover the full finished exterior, from siding and flatwork to pavers, decks and porches, and glass.
When during my project should I schedule the cleanup?
Schedule the cleanup for after the trades are finished, since post-construction cleaning is driven by the construction timeline. Cleaning too early means scrubbing surfaces that are about to get dirty again, so we coordinate with the general contractor or property manager to time the clean right before opening or handover. We confirm the start date and expected completion a few days ahead.
What does post-construction cleanup cost?
Every post-construction job is priced by scope, so we quote it on an on-site walkthrough rather than a flat rate. The number of surfaces, the amount of construction residue, and whether windows are included all factor in, and the walkthrough and written estimate are free with no obligation. The window portion specifically is priced per window, confirmed at your estimate, and commercial invoicing runs net 30 or net 60 depending on how your company operates.
Do I need to be on-site while you do the cleanup?
No. Post-construction cleanup is commonly coordinated with the general contractor or property manager, and the work is often done on an unoccupied build before opening or handover. If you’re available, we’ll walk the finished property with you at completion to confirm it meets expectations; if not, we complete the work and invoice afterward.